Please follow the below steps in order to fit the multifuel kit for an Aspect 4 double sided stove;
Remove both the log retainers.
2. Remove the bottom base brick by lifting up one
brick in the middle and slide out of body of
stove. Repeat with other side.
FITTING THE MULTIFUEL KIT
DOUBLE SIDED SINGLE DEPTH
1) Insert the MF front grate support plates by
dropping into place (one each end).
2) Slide the ash pan in under the front support
(one each end).
3) Insert the multi-fuel grate.
4) Place the new MF retainers onto the pins. (Both sides)
DOUBLE SIDED DOUBLE DEPTH
Follow steps 1 and 2 for the double single Double Single.
3) Screw the MF support legs into the MF grates x 2
(two legs per grate).
4) Insert the MF grates one each end with the
support legs to the centre of the stove.
5) Place the new MF retainers onto the pins