In order to convert a Herald CE boiler stove from multifuel to wood you would need to;
Remove all of the Grate Bars,
Cam Bar, Catch Bar, Ashpan,
Rear Primary Air Deflector and
Side Plates (if fitted).
Unscrew the 2 - M8 x 16 Set Screws,
using a socket wrench or similar tool,
and remove the Riddling Support
Bracket.
Refit these Screws, from the outside
of the Back Plate, partially screwing
them into the hole. This will ensure
that there is on excess air getting into
the Stove.
Fit the Side Bricks, Fit the Cam
Hole Plug over the hole in the side
of the Stove and secure using the
washer and M6 nut supplied.
Fit the Rear Wood primary Air
Deflector. Drop in the Log & Catch Bar.
You may need to adjust the Fan Catch to
ensure a good seal on the doors.