In order to convert a Herald MK11 stove from multifuel to wood you would need to;
Remove all of the Grate Bars, Cam Bar, Catch Bar,
Ashpan, Baffle Brick, Side Bricks and Side Plates.
Unscrew the 2 - M8 x 16 Set Screws,
using a socket wrench or similar tool,
and remove the Lower Brick Bracket
and Rear Brick.
Refit these Screws, from the outside
of the Back Plate, partially screwing
them into the hole. This will ensure
that there is on excess air getting into
the Stove.
Fit the Cam Hole Plug over the hole in the side of the Stove and
secure using the washer and M6 nut supplied.
Fit both the Side Bricks
Fit the Rear Brick and then the Baffle Brick.
Drop in the Log & Catch Bar. You
may need to adjust the Fan Catch
to ensure a good seal on the doors.