How to fit a Di Lusso R5 & R6 multifuel kit

To fit a Di Lusso R5 or R6 multifuel kit follow the steps below;

1. Open the stove door.
2. Remove the log retainer.
3. Remove the baffle.
4. Remove both side bricks, taking care
not to disturb the rear bricks.
5. Slide the bottom edge of the lower
rear brick towards you and remove.
6. Refit the side bricks and baffle.
7. Remove the grate from the grate
support frame.
8. Offer the grate support frame into the
stove, hooking the folded edge under
the ignition air bar.
9. Hook the front edge over the two
pins.
10. Lower the back edge of the grate onto
the grate frame and slide backwards.
11. Slide the ash pan in.
12. Place the log retainer onto the pins.