In order to install an Eco Aspect multifuel kit please follow the below steps;
Remove the current Fuel Retainer.
Note:
The Grate Kit can either be fitted on top of the Base Bricks or they
can be removed, and the Grate Kit can sit directly on the Base Plate
(If the Appliance is installed on a superimposed hearth it is
recommended to fit the Grate Kit on top of the Base Bricks)
Place the Grate Supports on either side of the Appliance
so that they are touching both the Side and Rear Bricks.
Insert the Fuel Retainer
in front of the Side Supports.
Tilt Grate to 45° and Insert into the
Appliance. Lower the Grate onto the
supports
being careful not to trap you fingers
between the Grate and side Bricks.
Slide the Ashpan into the gap below the Grate.